医院铅门定制安装的几个要点! - 山东多介质过滤器哪家好
欢迎光临!888贵宾会网站登录网址,主营:山东燃气锅炉山东电采暖锅炉山东多介质过滤器和射线防护器材等。
  • 服务热线:18678809986
  • 888贵宾会网站登录网址 关于我们 产品中心 888贵宾会手机版 工程案例 设备选型 联系我们
  • 您的位置:888贵宾会网站登录网址> 888贵宾会手机版 >

    医院铅门定制安装的几个要点!
    来源: 发布时间:2020-01-08

      在定制带铅门的医院一定要选择正品产品,这是后续使用带铅门服务的生命保证,医院带铅门的重要性不言而喻,同时也与使用安全息息相关
      In the hospital with customized lead door, we must choose authentic products, which is the life guarantee for the follow-up use of lead door service. The importance of hospital with lead door is self-evident, but also closely related to the use of safety
      介绍医院防护门的几个安装要点
      Several installation points of hospital protective door
      1、供应的医院导门生产厂家提醒您,在铰链位置的垂直定位侧框一定要做到点合规性
      1. Efficient professional hospital gate manufacturers remind you that the vertical positioning side frame at the hinge position must be point compliant
      一般要求在同一平面,挡圈应在铰链位置的侧架上进行,包括拉力爆炸的挡圈和拉力板的挡圈。医院铅门的护圈工作不是一个正式的护圈,而是一个真正的护圈,使护圈牢固,避免(大)变形。
      It is generally required that the retaining ring shall be carried out on the side frame at the hinge position in the same plane, including the retaining ring of tension explosion and the retaining ring of tension plate. The work of the apron of the hospital lead door is not a formal one, but a real one, which makes the apron firm and avoid (large) deformation.
      2. 在医院安装引线门之前,必须检查安装的防护门的完整性。如果有任何缺陷或异常,请不要安装它。
      2. Before installing the lead door in the hospital, the integrity of the installed protective door must be checked. If there are any defects or exceptions, do not install it.
      门进入门洞后,医院使用的铅门的密封接触面应贴在墙上,并处于垂直状态。如有必要,请施工方对墙台表面进行修正,或酌情将门移开。
      After the door enters into the entrance hole, the sealed contact surface of the lead door used in the hospital shall be pasted on the wall and kept in a vertical state. If necessary, ask the construction party to correct the wall abutment surface, or move the door away as appropriate.
    射线防护器材
      3.在医院安装引线门时,应调整门锁位置的宽度和垂直位置,使医院引线门的门扇与门框之间的间隙位置绝对一致
      3. When installing the lead door in the hospital, the width and vertical position of the door lock position shall be adjusted so that the gap between the door leaf and the door frame of the lead door in the hospital is absolutely the same
      为了保证测量的均匀性,需要使用的测量工具进行测量,才能进行更终的固定。否则,请继续调整位置,使其符合相关规定的参数。
      In order to ensure the uniformity of measurement, it is necessary to use professional measurement tools for measurement before final fixation. Otherwise, please continue to adjust the position to make it conform to the relevant specified parameters.
      以上是铅门相关事宜,希望对您有所帮助,我们将继续更新射线防护器材的相关信息,请继续关注我们
      The above is related to lead door, we hope to help you. We will continue to update the relevant information of radiation protection equipment. Please continue to pay attention to us at

    鲁公网安备 37011302000227号